- 1 How do you read a continental TYRE?
- 2 How do you read bike tire sizes?
- 3 What does 700x23c mean?
- 4 How do I know what model my Continental tire is?
- 5 What does the T stand for in tire size?
- 6 What does the T or H mean on tires?
- 7 What is the standard road bike tire size?
- 8 Is 26 inch the same as 700C?
- 9 What does C mean in bike tire size?
- 10 Which is better 700×23 or 700×25?
- 11 Is 700×23 the same as 700x23c?
- 12 Can I use 700×23 tires instead of 700×25?
- 13 Where is the date code on Continental tires?
- 14 Do tires have a serial number?
- 15 Where are my Continental tires made?
How do you read a continental TYRE?
How To Read A Tire Sidewall
- TIRE SIZE.
- P identifies your tire as a Passenger Tire.
- 225 identifies the tire section width, which is the measurement of the tire from sidewall to sidewall in millimeters.
- 50 is the two-figure aspect ratio.
- R indicates the construction used within the tires casing.
How do you read bike tire sizes?
Sizes such as 26, 24, 20, 27.5, 29 and 700c are common tire diameters. The second number (after the X) is the width of your tire. The range for widths is usually between 1 and 3 inches. For example, a 26 x 1.75 size means the tire diameter is 26 inches and the tire width is 1.75 inches.
What does 700x23c mean?
700x23c simply means the dimensions of your bike tire, under what’s known as the ‘French system’. The first number, 700, refers to the nominal diameter of the bike tire and is measured using millimeters. The second number, 23, is actually the width of the bike tire, again it’s measured in millimeters.
How do I know what model my Continental tire is?
The chronological age of any tyre can be found on the tyre sidewall by examining the characters following the symbol “DOT”. The last four numbers identify the date of manufacture of the tyre to the nearest week. The first two of these four numbers identify the week of manufacture (which range from “01” to “53”).
What does the T stand for in tire size?
A “T” means it’s a temporary spare. Some tires get a “Z” or an “F” attached to the radial indicator, denoting a Z-rated tire (see service description below) or a run-flat tire. By definition, all W- and Y- rated tires are also Z-rated, though not all get a “Z” embossed on the sidewall.
What does the T or H mean on tires?
by Jay Motes. Jupiterimages/Photos.com/Getty Images. The codes on the sides of tires are unfamiliar to most car and truck owners, but knowing what the codes mean is important to choosing the proper tires. The H / T on tires stands for highway/terrain.
What is the standard road bike tire size?
Road bike tires: Most road bikes have a 700mm outer diameter, with widths starting at 23mm. Most road tire widths are less than 30mm, but you can also find tires as wide as 45mm on bikes intended for gravel roads.
Is 26 inch the same as 700C?
A 26 inch, or a 650c wheel is about 1 inch smaller (about 2 inches smaller with road slicks) in diameter than a 700c. Some people think that because 700c wheels are the ‘standard’ for road bikes, they must be better.
What does C mean in bike tire size?
The letter “C” in a tire’s parameters refers to an archaic French standard for bike tire sizing which relied on letters ranging from “A” to “D” to indicate a tire’s width and subsequently the circumference of the corresponding rim.
Which is better 700×23 or 700×25?
The 23s are thinner, lighter (because they are thinner), and a little faster. 25s are 2mm greater in diameter, so they are a little heavier and better on rough roads. I have the 25s for training and 23s for racing. These are great tires if you don’t like flats.
Is 700×23 the same as 700x23c?
700×23 and 700x23C and 700C x 23 and 700x23c and 700x23c all mean the same size of tire. They are indeed the same size of tire. For some reason, the “c” gets shuffled about, sometimes being put after the 700, sometimes being put after the tire width (in this case, 23mm), etc.
Can I use 700×23 tires instead of 700×25?
There is very little difference between most 700×23 and 700×25 tires. Some manfacturers tires tend to run a little small in some models (my latest continentai 23’s are actually more like 20’s) If your bike came with 23’s you can run 25’s with no worries.
Where is the date code on Continental tires?
You can calculate the physical age of any car tire by examining the markings on the tire sidewall following the “DOT” symbol: The last four numbers denote the fabrication date of the tire to the nearest week.
Do tires have a serial number?
Tires made in the United States have the DOT serial number located on the inside sidewall near the rim. The letters “DOT” are followed by eight to thirteen letters and/or numbers that identify where the tire was manufactured, tire size and the manufacturer’s code, along with the week and year the tire was manufactured.
Where are my Continental tires made?
Continental Tire, a subsidiary of a German company, makes tires in five states: Michigan, Georgia, North Carolina, Texas and Illinois. General Tires are now made by Continental. Yokohama, another Japanese multinational, manufactures tires in Virginia.