What do numbers on bike tires mean?

The first number is the diameter of your wheel. Sizes such as 26, 24, 20, 27.5, 29 and 700c are common tire diameters. The second number (after the X) is the width of your tire. For example, a 26 x 1.75 size means the tire diameter is 26 inches and the tire width is 1.75 inches.

How do I know what size my bicycle tire is?

Check your tire’s sidewall —the numbers there indicate your tire size (roughly its outer diameter and its width, but not always in that order). Typical road bike tire: 700 x 32c indicates a tire that has an outer diameter of 700mm and a width of 32mm.

Is 622 the same as 700c?

The standard modern road bike wheel has an ISO diameter of 622 mm and is referred to as 700c (makes sense, right? /s).

What are bike tire sizes?

Generally speaking,Bicycle tire measurements have two components. The larger number is the tire diameter in inches, and the smaller number is the tire width in inches. Tire diameter usually ranges from 12 to 26 inches, and tire width normally ranges from 1.75 to 2.215 inches.

What does C mean in bike tire size?

The letter “C” in a tire’s parameters refers to an archaic French standard for bike tire sizing which relied on letters ranging from “A” to “D” to indicate a tire’s width and subsequently the circumference of the corresponding rim.

Can I put a wider tire on my bike rim?

You can go with a wider tire on a current rim or get wider rims to accommodate even wider tires. Always verify clearances: With any new tire, especially a wider one, you need to be sure it has adequate clearance within your frame.

What are the basic types of bike tires?

On a basic level, there are three types of tires you can choose from to put on your road bike, though some of this decision depends on the type of wheel you own or plan to buy. They include clincher tires, tubular tires and tubeless tires.

What does 700c stand for?

700c is the size of your bike tire, according to the ‘French system’. The “700” number is the stated diameter of the bicycle tire in millimeters. “c” is the width code of the tire (as you would see if you looked at your bike from behind or in front).

What is a 700c tire?

700C is used to refer to any tire, rim, or wheel with a 622mm BSD, but it could be on a skinny-tired road bike where the wheel has an actual diameter of only 660mm (which is actually a little LESS than 26 inches!), or a mountain bike with a wheel diameter of over 29 inches.

What is a 700c wheel in inches?

All road and cyclocross bikes are built with 700c wheels, which are 29 inches. However, 700c wheels are designed to accommodate a thinner tire. Many come in widths ranging from 18 to 23 millimeters, with touring tires ranging from 25 to 28 millimeters.

Is a 26 inch bike good for what height?

Bikes that are 26 inches in size work well for children and adults who range from approximately five feet to six-feet tall. They can also be appropriate for some taller people, but the best way to find out if it’s a good fit is by testing ride one!

What does a 26 inch bike mean?

The wheel size is the measurement of the diameter of the wheel with a mounted tire. Usually the size is written on the tire sidewall, for example it might read 26 x 2.2”, a typical mountain bike size. This indicates the wheel is 26” and the tire is 2.2” wide. Older road bikes might have 27″ wheels.