How do bicycle tire sizes work?

Bicycle tire measurements have two components. The larger number is the tire diameter in inches, and the smaller number is the tire width in inches. Tire diameter usually ranges from 12 to 26 inches, and tire width normally ranges from 1.75 to 2.215 inches.

What size bike tire should I ride?

If your bike can accommodate it, use a tire that is at least 28mm. Many touring and hybrid bikes will be fitted with even wider tires – up to 47mm wide. These wider tires will definitely provide a cushier ride, so if comfort is your main priority, sticking with these wider tire widths is a good idea.

What does 1.95 mean on a bike tire?

1.95 is the tire width. You do not really need to worry too much about this if you are just replacing the tire. Many people run mismatched tire widths. They do this on purpose and put the wider tire on the front of their bike so they will have more traction.

Are 28 and 29 bike tires the same?

The wheel sizes 28”, 700C and 29er or 29” all refer to the same rim size: ETRTO 622. The tyres can differ, but the 28”, 700C and 29er are all the exact same rim diameter. The 700 markings will be followed by the width in mm, and the 28 or 29 markings will be followed by the width in inches.

Is 26 inch the same as 700c?

A 26 inch, or a 650c wheel is about 1 inch smaller (about 2 inches smaller with road slicks) in diameter than a 700c. Some people think that because 700c wheels are the ‘standard’ for road bikes, they must be better.

Does bike tire width matter?

While tire diameter should be an exact match, you do have the option of putting on a tire with a slight variation in width. Some riders opt for wider tires, for example, to give them more traction and a somewhat cushier ride.

Is 27.5 the same as 700c?

Just as a 700C wheel is the same diameter as a 29” (29er) wheel, 650B shares the exact same rim diameter as 27.5”. 27.5”/650B rims have a bead seat diameter of 584mm, and 29”/700C rims have a bead seat diameter of 622mm.

What is the standard road bike tire size?

A standard road tire is 700c x 23mm, indicating a tire diameter of approximately 700mm and a width of 23mm. When shopping for road tires, you’ll look for 700c x your preferred width, 23mm being the slimmest option and going up to 36mm.

How do you determine bike size?

Back to top. Adult bikes are measured by their frame size. Most manufacturers now measure the frame from the centre of the crank axle, to the top of the seat tube. Most road bikes are measured in centimetres (cm), whereas mountain bikes are generally measured using inches (in).

What pressure should my bike tires be at?

Pump it up. Proper tire pressure lets your bike roll quickly, ride smoothly, and avoid flats. Narrow tires need more air pressure than wide ones: Road tires typically require 80 to 130 psi (pounds per square inch); mountain tires, 25 to 35 psi; and hybrid tires, 40 to 70 psi.

Can I put a wider tire on my bike rim?

You can go with a wider tire on a current rim or get wider rims to accommodate even wider tires. Always verify clearances: With any new tire, especially a wider one, you need to be sure it has adequate clearance within your frame.

What is 700x38c bike in inches?

In basic terms, a 700x38c tire is approximately 27 1/2 inches by 1 1/2 inches (or 1.50 inches). Easy, yeah?

Can I put a 700c tire on a 29 rim?

700C tyres on 29er rims works just fine; just beware of running narrow (25C and below) tyres on wide rims.

What better 27.5 or 29?

27.5 in. wheels have faster acceleration while 29ers are more efficient on longer rides. Smaller wheels accelerate faster than larger wheels. This is due mostly to where the weight of the wheel is distributed.