How do you fix a dent in a titanium?
The only other way to fix the dent is to cut it, replace the section cut it and reshape that section then weld it back together. Again fining a person that can weld titanium is going to be tough, you might go to a local welding supply and ask them if they know of any local shops that can do it.
How do you get dents out of headers?
AFM546. You, too, can use a household appliance to remove dents from your exhaust header pipes. And it’s free. Simply remove the pipe, fill it with water, stick it in the freezer, leave it while you watch the game or have a brew (or both), remove when it’s good and frozen, and thaw.
How do you get dents out of FMF pipes?
The correct way is to plug one end of the pipe, and install a plug in the other end with a schreader valve to allow you to pressurize the pipe. You add a few psi of air, and then heat the dent with a torch starting in the middle and moving out in a circle.
Can you fix a bent exhaust pipe?
To fix a bent pipe, your local auto parts store may lend you a pipe shaper tool to restore the pipe to its original shape. Also, make sure you have the necessary installation hardware like muffler clamps and/or U-bolts. When replacing parts, keep your system configuration within state and federal regulations.
Does a dented muffler affect performance?
The dent is very small and in a place where there is just sound insulation packed. It will not affect performance.
How does 2 stroke exhaust work?
How it works. The high pressure gas exiting the cylinder initially flows in the form of a “wavefront” as all disturbances in fluids do. The exhaust gas pushes its way into the pipe which is already occupied by gas from previous cycles, pushing that gas ahead and causing a wave front.
How do you get a dent out of a metal tube?
Larger steel pipe the dent can be removed with heat applied in a circle around the dent and pulling the steel out with a piece of welding rod that you have welded into the center of the dent. Then cut the rod and ground till smooth.