How do you take the back wheel off a Pashley?

Undo the cable that attaches to the toggle chain ( that goes into the right hand side of the axle ). Slacken off the axle nuts, push the wheel forward and roll the chain off the rear sprocket, if you can support the chain so much the better. Remove the wheel.

How do you take the wheels off a Sturmey Archer?

Where the cable meets the little chain, there should be a smooth barrel with a small, ridged wheel. You can unscrew the barrel and the cable and chain will detach so you can remove the wheel.

How does a 3 speed bicycle hub work?

Three speed hubs use a planetary gear system to achieve a gear ratio between the sprocket and the wheel. In this gear system the sun gear is fixed in place while the planet carier is rotated. This causes the planet gears to rotate which in turn causes the ring gear to rotate. The rider selects a speed using a shifter.

How do you change a rear cassette on a bike?

How to change a cassette

1. Remove rear wheel and quick release. Shift into the smallest sprocket.
2. Remove cassette. Wrap your chain whip around the sprockets, and insert the lockring tool.
3. Clean freehub body.
4. Attach new cassette.
5. Attach lockring.
6. Reattach quick release and fit wheel back onto bike.